MAIN LINE COMPUTER USERS GROUP - FEBRUARY 1999 - ISSUE #201

MORE ON WHEELS AND PC EMERGENCIES !! - PAGE # -

**** FEBRUARY 1999 ******************************** ISSUE #201 ****

VILLANOVA UNIVERSITY, ST. AUGUSTINE CENTER

MEETING STARTS - 09:30 - FEB 6th

COME JOIN US FOR FUN & LEARNING!

---------------------------------------------------------

THIS MONTH'S CONTENTS

---------------------------------------------------------

MAIN LINE 64/128/PC USERS - Room 110 Last month, we had a bit of a hitch with our Wheels 128 demo - no fault of the program! Since we have to use monochrome mode for the 80-column display (forced by our display system), it made some portions of the desktop invisible. Rather than play blind man's buff, we deferred to this month - where we'll try to get the display right! Come for a re-show! For the PC session, we'll continue with the subject of boot or emergency or rescue disks. We'll emphasize Win95; but the teachings are - we hope - applicable to other systems (including Win98). We'll resume with Part II - the MS Emergency Recovery Utility. There WILL be time for Q & A; so bring questions.

[continued on page 3]

Top

MAIN LINE AMIGA USERS - Room 210

As has been the case for many a January meeting, a winter storm hindered our meeting effort. Ice and rain ruled the day. However, the weather was not so bad. A few hearty members made it to the meeting. Due to the low turnout, our scheduled presentation was put on a back burner. Instead, since Ted Dean showed up with his Amiga needing some attention, we spent most of the meeting trying to get Ted's machine sorted out.

So, for February, weather permitting, we can review some of December's presentation on file systems if anyone still has questions. Otherwise, the CatalyzerII video will be the focus of the main presentation.

[continued on p.7]

Top

---------------------------------------------------------

NEW CAPABILITY

At the January meeting - which fortunately was NOT a washout - we had our first chance to take advantage of a new video projector for use with the computer systems. Up to now, we have used a VGA -> TV converter to display the PC output via the S-video input

[see more on p.3]

########################################

ANNOUNCEMENTS & SPECIALS

########################################

RENEWAL STATUS - at the end of January, when we have to remove from our member list those who have not renewed for 1999, we stand at 38 members, compared to 49 at the end of the 1998. We are happy that those folks have seen enough value in the group to renew. BUT, we are sorry to have lost roughly a fifth of our 1998 members. We hope that some of them will still re-join.

Turning to the future, if you know someone who has recently joined computing - or recently converted to a PC or Amiga, please let them know about us. We'll have plenty of extra copies of our newsletter at the meetings to help you spread the good word!

Also, we are looking for ways to let users know that we can provide support to a number of platforms; so we may be able to help them. Or, since user groups are reciprocal, THEY may be able to help US help others! If readers have any suggestions on spreading the word, please feedback to the Steering Committee members.

Top

***************************

SETI@home

Most of you have heard, by now, of the Search for Extra-Terrestrial Intelligence (SETI) - and have assumed that it is all being done by OTHERS. However, there is a way that anyone with a PC and internet access can participate.

You can install a program that works when your computer is otherwise idle. When you connect to the net, it goes - in the background - to a site where it can grab a batch of data. Then, it processes the data and transmits the results back to the SETI folks. Because of the enormous volume of raw data SETI collects, they need all the computing power they can get access to.

As of this time, apparently over 100,000 people have signed up to share the computing burden!!

If you are interested, go to:

http://www.set-inst.edu/

Interested???

--------------

The Computer Age

Cut you did with a pocket knife
Paste you did with glue
A web was a spiders home
And a virus was the flu

Top

$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$

$ TRADING POST $

$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$

FOR SALE: C-64 and a Seikosha printer, in original boxes. If interested, call Bobbie at 610-356-9682. (1)

FOR SALE: do you have a need to replace some ailing Commodore part? Are you looking for a particular piece of Commodore software? Or do you need to replace a master disk for Commodore software that no longer works - but you'd like it to?

Then, first contact our inventory manager, Charles Curran. Between his stash of club inventory - or another stash in Emil's hands - we may be able to fill that need.

Similarly, if you have a problem or need relating to Amiga hardware or software, be sure to head in the direction of our Amiga leader, John Deker.

Top

***************************

64/128/PC MEETING

***************************

[continued from p.1]

of a big screen TV. And have used the composite video input on that same TV to display the 64 or 128 outputs. As those who have used such a system can attest, the image quality leaves much to be desired!

For this meeting, we had the use of a high end video projector, an InFocus LP425 unit, that uses the new, high brilliance Texas Instruments DLP display technology. The projector accepts composite video (from a VCR, videocamera or computer, like the 64 or 128) and VGA/SVGA computer signals (resolutions of 640x480, 800x600 and 1024x768 are accepted). Because of the high brightness of the display, it was not necessary to have a dark room - the lights could be at a comfortable, talking level. This made for an easy-to-run demo setting. We hope to have the unit for future meetings. If you did not get a chance to see it in action, come to the next meeting and see!

For the 8-bit portion of the meeting, we had the new WHEELS 128 operating system - from ace programmer, Maurice Randall. We were able to start the OS up on the club 128 and get a color view in 40-column mode. However, to get the better capability of the 80-column mode, we had to be in monochrome, because of the limitations of the big screen TV display (80-column composite is monochrome only). Unfortunately, yours truly had not tested mono mode and the color palette chose made much stuff INVISIBLE on the screen!! Not having the keen skill to immediately rectify the deficiency, we decided to defer any further looking until the next meeting, where we hope to be more VISIBLE! 8-bitters are urged to come take a look.

For the PC portion, we had a pretty extended Q & A discussion. This was followed by, what turned out to be part 1 of, the subject of Emergency disks and utilities. This session followed pretty closely the article in the October newsletter - which covered making a boot disk (or StartUp disk) in Win95. See a further note on this item elsewhere in this issue. We plan to continue the subject next time.

Top

***************************

Quick and Cheap

by Thomas Johnson

Did you ever desire a program to accomplish a certain task, but you were short on money or thought you would not use the program enough to make it worthwhile?

Many specialized programs can be found freely available for downloading from the Internet.

Be aware that there are two different types of programs offered on the Net. Freeware is free to download. There is no cost involved. Shareware can be downloaded; but the author asks to be paid a certain amount, if you use the program more than a few times. Some programs are free to test for a certain period of time before payment is due.

One freeware program I recently downloaded is Irfan View, by Skiljan Irfan, a graphics viewing and editing program for 95, 98 and NT use. For the details, I quote the author from one of his pages: "Irfan View is a fast image viewer that supports animate GIFs and many other image formats....AIF, ANI, BMP, CAM, CLP, CPT, CUR, DCX, DIB, EPS, RLE, JPG, GIF (including animated GIF), PNG, PCX, TIF, IFF/LBM, LWF, PSD, TGA, RAS, ICO, AVI, WMF, EMF, PBJ, PBM, PGM, PPM, and PCD.

"Irfan View can convert images between most of the supported formats, either individually or in batch mode. Irfan View can also perform some basic image editing and processing functions, including cut, crop, resize, resample, change the color depth, adjust brightness and adjust contrast. It has command line options and it can display images in a slideshow and extract frames from ANI files, AVI movies and animated GIFs.

Many sites with more information can be found by using a search engine. Enter freeware AND Irfan View. (Be sure to capitalize the AND.) One hundred plus sites are listed.

Top

***************************

PC TIP - 1

Recently, I have come to appreciate very much a relatively unmentioned feature in Windows Accessories. From Windows 3.1x thru Windows 98, there is a text editor called NOTEPAD (notepad.exe - usually found in your windows directory).

For quite some time, I have tried to maintain a diary of things that I do with a system, problems encountered and solutions (if any) to those problems.

I've usually done this with either the DOS text editor - called EDIT (edit.com - usually in your DOS directory) - or with the above-mentioned Notepad accessory. This has involved firing up the editor, opening the diary (text) file, then doing the editing. But, there is a nicer and more helpful way to do it:

  1. start by firing up Notepad, then opening a new text file
  2. begin the file by entering as the first line .LOG
  3. save the file (say in a subdirectory called NOTES), as something brilliant like ThisPC or System or Charlie or whatever, then exit the editor
  4. set up an icon in Program Manager (Win 3.1x) or a shortcut on the desktop (in Win 95 or 98), which has for its command line:

    C:\WINDOWS\notepad.exe C:\NOTES\Name.txt

    (or whatever filename you used)

  5. now, whenever you wish to add to your diary, simply double-click the icon and your file will come up in Notepad.

But, it will also have a new line added to the end of the file which shows the DATE and TIME that you re-opened the file for editing. Just add your comments and save the file. Next time you open it a new date and time will be appended ready for you to add your new notes without consulting a clock or calendar.

The convenience and utility make it much easier to keep track of what happens on your system. Give it a try!

--------------
The Computer Age

An application was for employment
A program was a TV show
A cursor used profanity
A keyboard was a piano

Top

***************************

YEAR 2000 - PART II

[by Emil Volcheck]

Last time, I listed several general topics to consider in the Year 2000 (Y2K) problem. Briefly, they were:


A. Computer/systems related
B. Non-systems - (infra-structure)
C. Your role as a supplier

Taking these in reverse order:

C. Your role as a supplier to others (organizations or individuals) may put you in the position of needing to carefully and accurately spell out your ability to fulfill that supply role when the end of this year comes around.

I understand that some organizations have chosen to avoid any statements or committments on that ability - to avoid the potential for legal actions against them, should they prove to be wrong. If you are on the receiving end of such an approach, you'll obviously have to be very careful with that supplier. Should you choose that approach, you may find yourself with the potential of losing your supplier position to a competitor who is more forthcoming.

In my thinking, each situation is pretty unique and I can't propose to address the issue any further - except to emphasize that it could be a make or break situation.

B. Infrastructure - this venue relates to the maintenance of essential services like the local power, gas, water, telephone, etc. For most of us, no direct role is feasible - other than to follow the progress, or lack thereof, of these entities - and, possibly, urge legislators or regulators to keep the pressure on and monitor the progress appropriately.

As the perception of the situation broadens - and the deadline remains immovable - there has been an increase in publicity and attention to the infrastructure (as well as increasing hysteria!). It will probably not be difficult to learn how the locals do!

A. Computer and systems related - it is to this area that I want to expound upon in the next part and again express the hope that MLCUG folks will engage with each other on this subject that is rather nearer and dearer to their hearts!

[to be continued next time]

Top

MAIN LINE AMIGA USER HAPPENINGS

by John Deker

As has been the case for many a January meeting, a winter storm hindered our meeting effort. Ice and rain ruled the day. However, the weather was not so bad. A few hearty members made it to the meeting. Due to the low turnout, our scheduled presentation was put on a back burner. Instead, since Ted Dean showed up with his Amiga needing some attention, we spent most of the meeting trying to get Ted's machine sorted out.

So, for February, weather permitting, we can review some of December's presentation on filesystems if anyone still has questions. Otherwise, the CatalyzerII video will be the focus of the main presentation.

MEETING OVERVIEW

As noted previously, January's meeting turned into a "Help Ted Dean" meeting where we attempted to cure some of the problems Ted was having with his Amiga.

Ted's problems started with a couple of attempts to install the new version of Directory Opus MagellanII. MagellanII as it is called requires a two step installation. The first step is to install version 5.5. Ted had no problems with this step. The second step was to upgrade to version 5.8. For some reason the serial number protection scheme failed to work on Ted's Amiga. In Ted's effort to resolve this problem, he experienced a crash or two which had somehow corrupted his boot partition.

NOTES: Having been a long time user of DOpus, I've upgraded to the latest version on two Amigas (A2060 & A1260) without incident. Another member, Bill Bacon, recently installed the same DOpus software that Ted tried to install, also without incident. Ted & I tried to install a second copy of the DOpus software on Ted's machine and ran into the same problem again. Ted's machine is an A1200 migrated to a Micronik Infinitiv tower running a 1260 Blizzard accelerator with 1230 SCSI. His CDROM & hard drive are connected to the 1230 SCSI and his IDE bus is empty.

Our efforts during the meeting were focused on trying to cure his disk problems short of backing up everything, reformatting & restoring. At first we tried using Quarterback Tools. When QBTools failed to get through the entire partition without problem, we resorted to trying Disk Salvage. However, we ran out of time before completing our rescue efforts. We ended our rescue efforts to go to lunch.

WORKING WITH PICASSO

Recently I had an occasion to help Bill Bacon install an old PicassoII board in his A3000. (I've had one for several years in my A2060 running the latest version of the original Picasso software.) Bill's Picasso was a resold used board from Software Hut. With it he received the latest version of Cybergraphx software (not the original native software), a brief instruction sheet (not the original comprehensive manual), and a relatively short video cable.

We installed the board into Bill's relatively stock A3000 that has 2+8 megs of RAM and an IOBlix board. The hardware installation went without incident and was recognized in the Amiga's SHOWCONFIG output.

We next attempted to utilize the Cybergraphx software. To our disappointment, the A3000 was running at a crawl after the software was installed and running. We spent a brief amount of time reviewing the software docs for any configuration info that would help restore some speed, but we didn't find anything. I must say that in my opinion the Cybergraphx docs do not adequately describe the affects of the configuration settings.

Failing to resolve the problem, I suggested to Bill that we install my native PicassoII software. We removed the Cybergraphx software before installing the native Picasso stuff. What an improvement the native software made in speed. Yes, we lost some of the advantages of the Cybergraphx software, but the tradeoff was amazing.

IBROWSE 1.2x & PICASSO

Ever since IBrowse v1.2x came out I've had problems making it display graphics on Picasso screens. The installation of PicassoII on Bill Bacon's machine caused me to go back & review all configuration settings. I had previously given way to using IBrowse v1.12 on my A2060 with PicassoII so as to enjoy 256 color Picasso screens. I had also previously tried making Cybergraphx & Picasso96 work a couple of years ago, but ran into problems then. Recently, after fooling around with the CHANGESCREEN & IBROWSE software, I found a reasonable compromise to making things work:

1. In CHANGESCREEN the Programs MUI-PUBLICSCREEN-IBROWSE is set to DEFAULT mode with COPY CONTINUOUSLY checked and set to 5 EACH SEC.

2. In MUI the IBrowse Picasso screen is limited to a 7 bit screen of 128 colors. 256 colors seems to cause problems.

3. In IBROWSE v1.22-PREFERENCE-NETWORK-CACHE, USE FASTMEM FOR IMAGES is not checked. In IBROWSE-PREFERENCE-GENERAL-HTML DISPLAY, dithering is set to Floyd-Steinberg with DON'T DITHER BACKGROUNDS checked.

The last settings are not essential, but seem to give the best compromise between picture quality and speed.

SOFTWARE WORTH MENTIONING

DISK SALVAGE -- disk checking & repair utility. Early versions on Aminet, later versions are commercial software.

DOPUS MAGELLAN -- exceptionally good commercial file manager & alternative desktop (version 5.5+).

QUARTERBACK TOOLS -- commercial disk checking & repair utility.

SYSLOG -- from Aminet a Unix-like system log utility for capturing & managing personal logs as well as capturing error messages, etc, from application & system software.

HOW TO TALK AMIGA

(Or things you can ask your Amiga on a first date.)

My Amiga is pretty smart if you ask the right questions. What follows is a series of Q&A that I asked my Amiga recently. Not all of these questions can be asked of every Amiga, but as you can see, my Amiga has a lot to say when asked a few simple questions. What secrets can your Amiga tell you? Do you know how to ask the right questions? Can you say CLI?


New Shell process 17 17.Question:> date Monday 21-Dec-98 20:04:20 17.Question:> cpu System: 68040 68882 (INST: Cache Burst) (DATA: Cache CopyBack) 17.Question:> version Kickstart 40.63, Workbench 40.42 17.Question:> avail Type Available In-Use Maximum Largest chip 891888 152592 1044480 877608 fast 55750200 10834376 66584576 53725488 total 56642088 10986968 67629056 53725488 17.Question:> memspeed Memory Speed Test Copyright 1996 by Frank Wille. Type read write copy Chip RAM 2779 kB/s 3485 kB/s 1545 kB/s Fast RAM 33383 kB/s 23466 kB/s 14286 kB/s ROM 33456 kB/s - - 17.Question:> showconfig PROCESSOR: CPU 68040/68040fpu CUSTOM CHIPS: ECS NTSC Agnus (id=$0030), ECS Denise (id=$00FC) VERS: Kickstart version 40.63, Exec version 40.10, Disk version 40.42 RAM: Node type $A, Attributes $405 (FAST), at $8A18F60-$BF7FFFF (54720 K) Node type $A, Attributes $415 (FAST), at $8000000-$8A18F5F (10368 K) Node type $A, Attributes $703 (CHIP), at $170F0-$FFFFF (960 K) Node type $A, Attributes $713 (CHIP), at $1000-$170EF (64 K) BOARDS: Board + ROM (HD?) (unidentified): Prod=8512/24($2140/$18) (@$EA0000 128K) Board + ROM (HD?) (unidentified): Prod=2017/11($7E1/$B) (@$E90000 64K) Board (unidentified): Prod=2167/11($877/$B) (@$200000 2meg) Board (unidentified): Prod=2167/12($877/$C) (@$EC0000 64K) Board (unidentified): Prod=2167/201($877/$C9) (@$ED0000 64K) CBM A2386-SX Bridgeboard: Prod=513/103($201/$67) (@$400000 512K) 17.Question:> showboards ShowBoards V 1.3 (15-Aug-97) boards.library 2.20 (22-Nov-98) 1996-98 by Torsten Bach email: lsi@berlin.snafu.de Nr Manufacturer Product Address Size ========================================================================= 1 Phase 5 Digital Products Blizzard 2060/2040 $00EA0000 128k ---------------------------------------------------------------------- ManufacturerID ProductID Flags Type ---------------------------------------------------------------------- 8512 24 $00 $D2 Nr Manufacturer Product Address Size ========================================================================= 2 Great Valley Products SeriesII/HC8+ SCSI | I/O Ext $00E90000 64k ---------------------------------------------------------------------- ManufacturerID ProductID Flags Type ---------------------------------------------------------------------- 2017 11 $00 $D1 Nr Manufacturer Product Address Size ========================================================================= 3 Village Tronic Picasso II(+) Memory $00200000 2M ---------------------------------------------------------------------- ManufacturerID ProductID Flags Type ---------------------------------------------------------------------- 2167 11 $00 $CE Nr Manufacturer Product Address Size ========================================================================= 4 Village Tronic Picasso II(+) $00EC0000 64k ---------------------------------------------------------------------- ManufacturerID ProductID Flags Type ---------------------------------------------------------------------- 2167 12 $00 $C1 Nr Manufacturer Product Address Size ========================================================================= 5 Village Tronic Ariadne Ethernet Card $00ED0000 64k ---------------------------------------------------------------------- ManufacturerID ProductID Flags Type ---------------------------------------------------------------------- 2167 201 $02 $C1 Nr Manufacturer Product Address Size ========================================================================= 6 Commodore (Braunschweig) A 2386SX BridgeBoard $00400000 512k ---------------------------------------------------------------------- ManufacturerID ProductID Flags Type ---------------------------------------------------------------------- 513 103 $02 $C4 17.Question:> ifconfig lo0: flags=C9 MTU=1536 inet 127.0.0.1 netmask FF000000 Hardware type: Loopback ariadne: flags=4863 MTU=1500 inet 192.168.0.3 netmask FFFFFF00 broadcast 192.168.0.255 Hardware type: Ethernet, address: 0:60:30:0:3:44 ppp: flags=40F0 MTU=1500 inet 207.103.134.112 --> 207.103.158.232 netmask FFFFFF00 Hardware type: PPP Use "ifconfig -h" for usage. 17.Question:> smbclient -L localhost Added interface ip=207.103.134.112 bcast=207.103.134.255 nmask=255.255.255.0 Server time is Mon Dec 21 15:04:25 1998 Timezone is UTC-5.0 Domain=[LAN1] OS=[Amiga] Server=[Samba 1.9.17p4] connected as guest security=share Server=[LOCALHOST] User=[jwdeker] Workgroup=[LAN1] Domain=[LAN1] Sharename Type Comment --------- ---- ------- CDROM Disk ATAPI (or whatever) GFX Disk Graphics files homes Disk Home directories IPC$ IPC IPC Service (Ami2000) jwdeker Disk Home directories LPR0 Printer HPDJ660Cse Store Disk Dump files here Work Disk Work partition files This machine has a browse list: Server Comment --------- ------- A1200 Ami1200 A2000 Ami2000 PC4333 PowerSpec4333 This machine has a workgroup list: Workgroup Master --------- ------- LAN1 A2000 17.Question:> netstat all Proto Recv-Q Send-Q Local Address Foreign Address (status) tcp 0 0 localhost.1032 localhost.netbios-ssn TIMEWAIT tcp 0 0 *.http *.* LISTEN tcp 0 0 *.printer *.* LISTEN tcp 0 0 *.netser *.* LISTEN tcp 0 0 *.AMarquee *.* LISTEN tcp 0 0 *.qotd *.* LISTEN tcp 0 0 *.telnet *.* LISTEN tcp 0 0 *.whois *.* LISTEN tcp 0 0 *.netbios-ssn *.* LISTEN tcp 0 0 *.ftp *.* LISTEN tcp 0 0 *.finger *.* LISTEN tcp 0 0 *.chargen *.* LISTEN tcp 0 0 *.discard *.* LISTEN tcp 0 0 *.echo *.* LISTEN tcp 0 0 *.time *.* LISTEN tcp 0 0 *.daytime *.* LISTEN udp 0 0 *.netbios-dgm *.* udp 0 0 *.netbios-ns *.* udp 0 0 *.chargen *.* udp 0 0 *.discard *.* udp 0 0 *.echo *.* udp 0 0 *.time *.* udp 0 0 *.daytime *.* 17.Question:> status Process 1: No command loaded Process 2: Loaded as command: C:MagicWB-Demon Process 3: Loaded as command: c:picdtpatch Process 4: Loaded as command: SYS:System/ForceIcon/WBStartUp/ForceIcon Process 5: Loaded as command: c:SetDevice Process 6: Loaded as command: PowerSnap-handler Process 7: Loaded as command: SYS:RexxC/rx Process 8: Loaded as command: SYS:PC/Services/AmiCDex Process 9: Loaded as command: AmiTCP:AmiTCP.020 Process 10: Loaded as command: AmiTCP:bin/inetd Process 11: Loaded as command: HTTP:httpd Process 12: Loaded as command: AmiTCP:samba/bin/nmbd Process 13: Loaded as command: System:SysLog/SysLogDaemon Process 14: Loaded as command: DOLAUNCHER Process 15: Loaded as command: SYS:PC/FLIPPER Process 17: Loaded as command: status 17.Question:> info Mounted disks: Unit Size Used Free Full Errs Status Name CD0: No disk present ZAFS0: 88M 147359 33784 81% 0 Read/Write PCZipEFG PC0: No disk present SD0: 1759K 6 3512 0% 0 Read/Write SD0 MAC0: No disk present AF0: No disk present RAM: 54M 937 55282 2% 0 Read/Write Ram Disk DH0: 76M 130425 27013 83% 0 Read/Write System DF0: No disk present DH1: 559M 583591 562358 51% 0 Read/Write Work DH2: 647M 1117499 209026 84% 0 Read/Write GFX DH3: 652M 597306 738248 45% 0 Read/Write Storage Volumes available: PCZipEFG [Mounted] SD0 [Mounted] Ram Disk [Mounted] Storage [Mounted] GFX [Mounted] Work [Mounted] System [Mounted] 17.Question:> assign Volumes: PCZipEFG [Mounted] SD0 [Mounted] Ram Disk [Mounted] Storage [Mounted] GFX [Mounted] Work [Mounted] System [Mounted] Directories: TERM Work:Telecomm/term030 PROGDIR Work:A2000HD-Pro/TransWrite D5THEMES System:DOpus5/Themes VMEM GFX:PicManager/Temp PICMANAGER GFX:PicManager ARTEFFECT GFX:ArtEffect sisys System:sisys ImageFX3 Work:ImageFX3 AEMail System:AmiTCP/AEMailMail X11 Storage:AmiWin/x11 AWeb3 Work:Telecomm/AWeb3 ImageFX GFX:ImageFX2 BIN System:AmiTCP/samba/bin etc System:AmiTCP/db HOME System:S INET System:AmiTCP AmiTCP System:AmiTCP DOpus5 System:DOpus5 HISPEED Work:Editors/GoldEd/Tools/HiSpeed GOLDED Work:Editors/GoldEd TwistIcon Work:Twist/Icons Twist Work:Twist JPEGTMP System:T PSFonts Work:FinalWriter/MathScript MathScript Work:FinalWriter/MathScript HELM Work:DemoWare/Helm MUI System:MUI EModules Work:Languages/AmigaE/modules BMAP Work:Languages/HBasic2/BMAP BH Work:Languages/HBasic2/BH HBasic2 Work:Languages/HBasic2 CGFonts Work:A2000HD-Pro/PSIII/CGFonts PWrite Work:PSuite/PWrite PPaint Work:PSuite/PPaint PSuite Work:PSuite LIBX11 System:libx11 TurboPrint System:TurboPrint TurboCalcHelp Work:TurboCalc/Help OnTheBall Work:OTB Real GFX:Real Post Storage:Post Miami Work:Telecomm/Miami MABroadCast GFX:MABroadcast Ami2D Storage:Ami2D DU Work:DigitalUniverse DPaintV GFX:DPaintV IBrowse Work:Telecomm/IBrowse HTTP Storage:httpd GM Work:Amusements/Music/GMPlay Ghostscript Work:Ghostscript FTPMountDir Work:FTPMountDir FinalCalc Work:FinalCalc FrexxEd Work:Editors/FRexxEd EdgePrg Work:Editors/Edge EdPlayer Work:Amusements/Music/EdPlayer21 FREDSCRIPTS GFX:ADPro/FREDScripts AudioThunder Storage:AudioThunder ADPROSCRIPTS GFX:ADPro/Commands2 ADPFRED GFX:ADPro ADPRO GFX:ADPro dsgsc dsfsi Work:DistantSuns/data2/fsiimages BBS Storage:Telecomm/MAX154US/BBS SBPRO3 Work:DataBases/SuperBase GPFax Work:Telecomm/GPFax DMstr Work:DataBases/DirMaster Virus Work:DataBases/VIB True BASIC Work:Languages/TrueBASIC MaxiPlan4 Work: CrossMAC System:Tools/CrossMAC COMAL Work:Languages/AmigaComal NComm Work:Telecomm/NComm OnLine! Work:Telecomm/OnLine! TransWrite Work:A2000HD-Pro/TransWrite Instruments Work:A2000HD-Pro/MultiMedia/Instruments Songs Work:A2000HD-Pro/MultiMedia/Songs MultiMedia Work:A2000HD-Pro/MultiMedia A2000 Work:A2000HD-Pro DOpus System:DOpus AsimTunes System:AsimCDFS AsimCDFSBuffer Storage:AsimCDFSBuffer AsimCDFS System:AsimCDFS HELP System:Locale/Help + System:MUI/Docs LOCALE System:Locale + System:MUI/Locale KEYMAPS System:Devs/Keymaps PRINTERS System:Devs/Printers REXX System:Rexx CLIPS Ram Disk:Clipboards T Ram Disk:T ENV Ram Disk:ENV ENVARC System:Prefs/Env-Archive SYS System: C System:C + System:Rexxc S System:S LIBS System:Libs + System:Classes + System:MUI/Libs + System:Classes + Work:Telecomm/term030/Libs DEVS System:Devs FONTS System:Fonts + Work:Telecomm/term030/Fonts L System:L Devices: FTP PRT TCP APIPE KRAW KCON RAW CON PIP CNC CD0 ZAFS0 PC0 SD0 LOG MAC0 PIPE AF0 AUDIO SPEAK GS1 GS0 GP0 RAM SER PAR DH0 DF0 DH1 DH2 DH3 ======================================    <>   /\\ |\ /|| || / ` /\\ /\\ | \ / || || ||  /\\ / \\| \/ |||| \/// \\ ======================================

FUTURE MEETINGS

If you have either software or hardware for your Amiga that has taken your fancy, please bring it to our attention. I'm sure your specific interests will be of interest to others. Let me know if this is the case at the next meeting, or leave me email on our BBS. Remember, a user group is only as rewarding as the sum of the efforts of its individual members.